HP Workstation xw4100
Showing 1–24 of 131 results
-
512MB (2×256) SDRAM DIMM memory modules – PC3200 DDR2-400MHz, registered ECC, CL3.0
$62.17 -
PS/2 two-button scrolling mouse (Carbon Black) – Has 1.8m (72in) long cable with 6-pin mini-DIN connector
$50.00 -
1.44MB, 3.5-inch floppy disk drive (Carbon Black) – Does not include bezel or eject button
$267.39 -
HP workstation xw4100 base unit
$50.99 -
Easy Access PS/2 keyboard assembly (Carbon Black with Silver key bezel) – Has 8 top row shortcut keys and attached 1.8m (6.0ft) cable with 6-pin mini-DIN connector
$51.95 -
Chassis (SM) assembly – For XW4100 personal workstation
-
Power cable assembly – Includes the power switch, power LED, and disk activity LED – 40.0cm (15.75in) long cable with 18-pin (F) connector
$62.84 -
Front bezel assembly (Carbon Black with Silver side accents) – Includes the front cover, floppy drive bezel, power button, light pipe, nameplate, and optical drive filler panels
-
Access cover assembly – Includes the side cover and locking latch assembly
-
Front bezel assembly – Includes two USB connectors, headphone jack, microphone jack, IEEE-1394 (FireWire) connector, and all attached interconnecting cables
-
System processor board (CANTERWOOD XW4100) – Does NOT include the processor module – Mounts in the right side of the computer Part 331224-001N , 331224-001
-
HP D2808F3P 326135 001 331223 001 power supply assembly rated at 100 230vac nominal input switch selectable 412w input 280w output 50 60hz 280 watts max btu load 1 47k btu hr
$258.63 -
40GB IDE hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high
$152.00 -
Plastics kit – Includes the floppy drive bezel, the front I/O door, two drive mounting rails, AGP vidoe card support, IEEE 1394 FireWire connector plug, and two cable clips
$141.00 -
USB memory key, 32MB
-
Return kit – Includes box and foam, used for returning PC back to factory
-
IDE Ultra ATA dual device cable – 38.7cm (15.25in) long
$50.00 -
Holder assembly – Retains the power switch, power LED, and disk activity LED
$50.00 -
IDE Ultra ATA dual device cable – 40-pin (F) to dual 40-pin (F), 31.8cm (12.5in) long with pull tabs and center polarization
$60.19 -
Floppy drive data cable – 34-pin (F) to 34-pin (F), 20.3cm (8.0in) long
-
Heat sink kit for Pentium 4 processors – Rectangular finned heat sink with two retaining clips and a cooling fan mounted on top – Has pre-applied thermal grease – Kit also includes an alcohol cleaning pad
$79.00 -
Chassis fan, 92mm
$79.00 -
Speaker assembly – Includes a 40mm by 70mm speaker with attached 35.6cm (14in) cable – 3 Watt, 16 ohm
-
Return kit – Includes box and foam, used for returning PC back to factory